 |
Acticare TSE - Technical Information |
|
Feature |
Specification |
| Modes: |
TSE "pain relief" and TENS therapy options. |
| User controls: |
Full digital control of all
treatment and waveform parameters. |
| Treatment timer: |
User adjustable from 10 - 180 minutes |
| Pulse rate: |
1Hz - 20kHz |
| TSE and TENS pulse form: |
Biphasic, mono-phasic or twin
peak. |
| TSE and TENS pulse duration: |
0.5 to 200 us |
| Patient in circuit detection: |
Limits output and displays
warning message if patient disconnected. |
| Power source: |
Four rechargable AA batteries (average
two hour operating life) with charger or optional mains re-charging cradle
(charge time from flat = 2 hours). |
| Maximum current: |
20mA average |
| Maximum charge per pulse: |
25uC limited by safety circuit
(all modes) |
| Control: |
Microprocessor controlled with
hardware supervisory safety circuit. |
| Dimensions: |
100mm high, 72mm deep, 38mm
wide |
| Key design compliance: |
IEC 60601-2-10 |
|
back
Technical
Specifications
